About VICIVISION
Vici Vision systems perform fast and accurate external dimensional profile measurements on cylindrical parts, such as shafts, valves, spools, and screws. Small shops benefit from shorter machine tool setup and changeover time. Large volume shops benefit from flexibility and automation.
Vici systems are rugged and designed for use on the shop floor. This makes them ideal for machine tool operator use. It will replace a comparator, thread ring gages, micrometers and roundness machine. Imagine all those measurements condensed into one system and performed in less than a minute!
The trade marked Full-Scan™ processing acquires a complete profile scan of your part in one pass. That scan data is then used to evaluate tens or even hundreds of dimensions in seconds.
X-Series
To measure the smallest details.
PRIMA Series
The optical measuring machine for all turneries.
TECHNO Series
This measuring machine range is designed to adapt to current and future manufacturing demands. For shafts up to 1250 x 180 mm.
Touch Probe
VICIVISION provides a completely new measuring function for shafts, combining the specific optical know-how method with a Touch Probe measuring system.
The Optical Measuring system, made of telecentric lens, light source, rotation system and sensors, provides since years a wide list of measurements to hundreds of shafts producers.
Today, the combination of optical and tactile functions results in a complete measuring control for turned parts in just one cycle. The unbeatable price-performance measuring system is now enriched with a Renishaw Scanning Probe, mounted on the top of the light source. The probe is interchangeable and covers the whole length area. While the optical measuring system quickly provides static, geometric and thread measurements, form and nut measurements, the touch system detects features that are not optically visible.
The optical and touch combo gives to end users the possibility of measuring:
-
Axial and Total Axial Run-out
-
Length
-
Planarity
-
Perpendicularity
-
Keyway width
-
Keyway depth
-
Keyway length
