The Renishaw (R&R) Fixture is a modular fixturing system that is designed for use with Coordinate Measuring Machines (CMMs). They are designed to reduce the need for traditional fixturing methods which often take longer to set up than to measure the part. They can adapt to any application through the use of various size components and base plates.
Fixturing to Inspect Nearly Anything
We have the largest selection of base plates and components available in either English or Metric sizes to adapt to any application you may have. Whether it is a small medical part, an aluminum casting or large steel automotive stamping, this one fixture system has the ability to adapt to all of your applications.
Maintain Consistent Fixturing
Documenting the original setup maintains consistency with future setups which is especially helpful when there are multiple users or a lapse of time between setups. Whether a part is checked daily or periodically, our alpha-numerically labeled plates and components enable accurate and consistent setups the same way each and every time.
Set Up Fixturing In Minutes
All of our components work together and can be hand threaded into the fixture plate to nest and secure the part. The majority of our components are hand tighten only so parts can be set up within minutes. Plus, multiple parts can be fixtured on the plate at one time - increasing the productivity of your CMM.
Save Time With Fixturing
To save time, multiple parts can be fixtured on a plate at one time or subplates can be used to automate your inspection process even further. When that part is no longer checked frequently, the fixturing components and plate can be reassembled for other parts resulting in major cost savings.
No More Obstruction From Fixturing
Unlike traditional fixturing, where features can be obstructed from the probe due to cumbersome and bulky part fixturing, Renishaw's fixturing enables a clear probe path for more precise measurement and better access to the entire part.
Other Products From Renishaw
Probing systems and styli for coordinate measuring machines are available from Renishaw, a world leader in probe heads for CMM's and machine tools. Indexible, laser scanning and video probe heads provide accurate and efficient measurements. Whether you are retrofitting or purchasing new, Renishaw has the probing system for you.
To compliment their probe heads, Renishaw offers a comprehensive range of styli for CMM and CNC users. Thread sizes include M2, M3, M4, and M5. Materials such as graphite, ceramic, and tungsten carbide provide optimum performance. All styli are manufactured to ISO 9001 standards.
Click HERE for info on the TP200
PH10M-iQ PLUS
The range of PH10 PLUS motorised probe heads increases throughput by giving automated CMMs the added capability of program controlled probe re-orientation. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes.
Less time calibrating, more time measuring
PH10M-iQ PLUS offers all the benefits of a traditional PH10M PLUS but with the addition of inferred qualification. This further demonstrates Renishaw's commitment to continuous product development.
PH10M-iQ PLUSincreases throughput by removing the need to qualify each head position that is used. This allows more time to be spent measuring.
Fine tune your performance
Where an application or specific angle demands ultimate touch-trigger accuracy then PH10M-iQ PLUS can be qualified in the same way as a standard PH10M PLUS.
Compatibility
Renishaw's complete range of PH10M PLUS compatible probes are also compatible with PH10M-iQ PLUS. However, the added functionality of inferred qualification can only be used with touch-trigger probes. TP-20, TP2-5W, TP200, TP6, TP6A and TP7A touch-trigger probes can be used in traditional PH10 mode or can utilized inferred qualification; whereas SP25M and SP600M scanning probes can only be used in traditional PH10 mode and cannot utilize inferred qualification. The PH10M-iQ must be integrated into the front end software to utilize this enhancement. Renishaw's UCC I++ Controllers have this integrated.
PH10M-iQ PLUS comes with a 24 month warranty. For more details, Contact Us.
Special TP2 Upgrade Offer
Upgrade your existing TP2 probe sensor to Renishaw's innovative TP20 probing system and help deliver a substantial increase to your inspection productivity.
This special offeris designed to update your inspection process to the latest technology-at a significant cost savings! You can easily optimize your probe and stylus performance with seven specialized probe modules designed for a wide range of applications.
The TP20 probing system is a direct replacement for TP2-5W and TP2-6W probe-no other program modifications are required.
Benefits of the TP20 include:
- Flexibility to automate your inspection processes
- Reduces inspection times with fast, repeatable, stylus changing
- Eliminates time consuming re-qualification
- Optimizes probe and stylus performance with seven specialized probe modules designed for a wide range of applications
- Improved collision protection - with two-piece magnetic design
- Extended life with multiple modules
- No manual spring tension adjustments required - predictable performance throughout a wide range of operating conditions.
