Sale!

$473.10 – $799.90

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator.

683-1Z, 683-2Z, 683-3Z, 683-4Z, 683M-1Z, 683M-2Z,?683M-3Z, 683M-4Z

684-1Z, 684-2Z, 684-3Z, 684-4Z, 684M-1Z, 684M-2Z,?684M-3Z, 684M-4Z

SKU: N/A Categories: ,

Description

Inch White Face Dial

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Metric Yellow Face Dial

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Additional information

Weight 4 lbs
Dimensions 10 × 6 × 6 in
Select Size

683-1Z, 683-2Z, 683-3Z, 683-4Z, 683M-1Z, 683M-2Z, 683M-3Z, 683M-4Z, 684-1Z, 684-2Z, 684-3Z, 684-4Z, 684M-1Z, 684M-2Z, 684M-3Z, 684M-4Z

Related products